We are now a Private label distributor for Atlas actions. These are fine actions and we are very impressed with their finish and design. There are a lot of great options in these actions. Because Premier Accuracy is dedicated to bringing you more choices adding this action to our product line seam a natural choice.
Every action is made from 4140 steel stock. The bolt channel is precision gun drilled and then the bolt race ways are then broached on the same machine without moving the bare stock. This ensures perfect alignment. The resulting finish is very smooth and has virtually no tooling marks whatsoever. Cycling the bolt is a very smooth and seamless motion with no binding. Even when the action gets dirty in the field it outperforms the other actions we have tried when treated to the same level of neglect. We do not encourage neglect, but it is sometimes unavoidable when on the hunt during extreme conditions.
The bolt bodies are also gun drilled to allow the firing pin to lock and release in the straitest line posable. That means the firing pin does not touch anything until it reaches the primer. The bolt body is machined to match each receiver to ensure great timing. We really like the ejector in the Atlas bolts too. These are call the TG Ejector System. Some great benefits in this is that there are no springs pushing against the cartridge while it is chambered. We like this feature because your cartridge of choice is not under off center pressure when chambered. When the bolt is pulled out for extract, the ejector is pushed by the bolt stop to eject the cartridge. A soft bolt throw gently ejects a spent case while a fast one will send the brass out several feet if desired. This is a feature that is a big winner for us. Gone are the days of trying to catch a case as it is extracted and the brass does not get scratched on its way out because it never touches the inside walls of the receiver. Bill has his own bolt release that runs very smooth.
The action body is also packed with features and there are a host of options available for any extreme. Recoil lugs are dual pinned to ensure prefect alignment. Also the trigger hangers allow Bill to adjust firing pin fall to your exact specifications. There are three standard bolt face sizes and Premier Accuracy can custom size them to any size between for specialty cartridges.